Pharmacy & Laboratory

Mobile Room UVC Germicidal Solutions for Pharmacies and Laboratories

ARTZ 2.0® Mobile Room UVC Germicidal Solutions for Healthcare

Automatically, Reliably Targeting Zero (ARTZ) microorganisms, using the proven power of UVC disinfection in the healthcare environment, is the goal of the ARTZ® 2.0 mobile room solution device. The ARTZ 2.0 is a re-design of the original ARTZ device, but now with faster disinfection cycles, a more simplified user interphase, and the necessary document control features for our healthcare clients.

This customer favorite is used everywhere from small patient care environments (treatment rooms and offices); Emergency Rooms; patient rooms at terminal clean; hospital bathrooms; hospital cafeterias and common areas; children's hospitals for enhanced play area disinfection, to large Operating Room Suites. The ARTZ 2.0 is found anywhere additional UVC disinfection is needed. The ARTZ 2.0 is non-intimidating and can be quickly learned by any user. It's also less expensive, more efficient, and more effective than any other comparable mobile room germicidal UVC disinfection device in the marketplace.

ARTZ systems

Watch Video about ARTZ
in Mobile, AL hospital.


UVC Dosimeter
New! Verify UVC exposure.

Here's what makes the ARTZ 2.0® so unique: 

Affordable

  • Economically priced high-end system; Inquire today to learn more.
  • Individually validated UV lamps are rated for 12,000 hours, which exceeds all other mobile room UVC devices

Fast

  • Sets up quickly with any web-enabled device of your choosing (mobile phone, tablet, or laptop)
  • Features high-output UVC flux
  • Disinfects high touch non-critical surfaces from microorganisms in minutes

Effective

  • Delivers balanced and uniform UVC flux to surfaces and air; automatically delivers dose needed to reduce microorganisms.
  • Preset dosage recipes are built into the system to target desired microorganisms; if preferred, ARTZ 2.0® can be set manually to provide required dose

Safe

  • 360° motion sensors - ARTZ 2.0® automatically shuts off if room is entered for any reason during treatment

Downloadable Data

  • Automatic document control data logging helps reduce or eliminate human error during data collection
  • Wirelessly downloads acquired session data to a computer
  • Measures productivity and time management
  • The ARTZ 2.0® records session log-in, users, dates, device locations; device run time; device settings; reporting

User-friendly

ARTZ 2.0 mobile interface

The ARTZ 2.0® can be controlled from the web-enabled device of your choosing. Simply connect to the ARTZ 2.0's discrete Wi-Fi network and log in to web-based controls that offer cycle logging, fault logging, and lamp status information.

  • Easy-to-operate; Minimal training required
  • Adjunct to standard terminal cleaning process
  • Controlled by any web-enabled device of your choosing (mobile phone, tablet, or laptop)
  • 360° handle for ease of transport
  • Multiple languages available

Green Technology

  • Produces no ozone or other secondary contaminants
  • No additional chemicals necessary
  • No waste is generated

Download Brochure

Folleto en Español


MRS45-12 Mobile UV Unit

The MRS45-12 mobile UVC device is ideal when very fast UVC disinfection times are needed for small, medium, or large areas, including patient care environments, operating suites, nursing homes, emergency shelters, large exercise facilities, gymnasiums, meeting rooms, manufacturing facilities, and prisons / jail cells. The MRS45-12 is designed to accommodate all environmental service applications, and due to its user-friendly design, can be found "in all spaces."

This unit uses 360-degree motion sensors as a safety precaution and features twelve (12), 45" slimline UVC lamps for maximum intensity. System controls are located directly on the unit, which allows utilization of a touchscreen with 3 preprogrammed disinfection cycle times, and the option to manually set disinfection cycles times. The MRS45-12 delivers a lethal dose of UV-C energy. UV-C energy has been shown to disinfect air and surfaces in minutes when installed and sized properly.

MRS45-12 MOBILE UV UNIT

Features

  • 304 stainless steel construction
  • 360° motion sensors for automatic shut-off
  • Large, high quality, locking casters for ease of transport
  • 120/220 Volt, 50/60 Hertz
  • Formed stainless tube structure protects lamps and improves ability to handle and transport the unit
  • Access panel for ease of maintenance
  • Touchscreen controller with preset and manual disinfection
  • 15-foot power cord

Technical Specifications

  • Weight: 90lbs
  • Dimensions: 67"H x 26"W x 26"D
  • Lamps: GML515 x 12
  • Electrical Requirements:
    • 8A @ 120V
    • 4.5A @ 220V

Download Brochure


MRS33-8 Mobile UV Unit

The MRS33-8 mobile UVC device can quickly disinfect medium to large-sized rooms, including healthcare environments, patient rooms, restaurants, office spaces, elevators, daycare environments, nursing and long-term care facilities, schools and universities, emergency shelters, exercise rooms and gymnasiums, spas, bathrooms, and shower areas. It can also fit into public transportation vehicles for quick disinfection and will comfortably fit in the back of emergency medical vehicles.

This unit uses 360-degree motion sensors as a safety precaution and features eight (8), 33" slimline UVC lamps optically centered around a highly polished reflector for maximum intensity. System controls are located directly on the unit, which allows utilization of a touchscreen with 3 preprogrammed disinfection cycle times, and the option to manually set disinfection cycles times. The MRS33-8 delivers a lethal dose of UV-C energy. UV-C energy has been shown to disinfect air and surfaces in minutes when installed and sized properly. 

MRS33-8 MOBILE UV UNIT

Features

  • 304 stainless steel construction
  • Motion sensor for 360-degree automatic shut-off
  • Large, high quality, locking casters for ease of transport
  • 120/220 Volt, 50/60 Hertz
  • Formed stainless tube structure protects lamps and improves ability to handle and transport the unit
  • Access panel for ease of maintenance
  • Touchscreen controller with preset and manual disinfection
  • 15-foot power cord

Technical Specifications

  • Weight: 85lbs
  • Dimensions: 47"H x 20"W x 20"D
  • Lamps: GML100 x 8
  • Electrical Requirements:
    • 4A @ 120V
    • 2.2A @ 220V

Download Brochure


MRS14-4 Mobile UV Unit

The MRS14-4 mobile UVC device has proven to be a favorite solution for Emergency Medical Services, firefighters, law enforcement vehicles, school environments, restaurants, workplace areas, bathrooms, veterinary offices / kennels, and really all environments with a smaller footprint. It can be hung from the top or bottom mounting hooks, placed on desks, and easily moved around on rolling carts. It quickly disinfects surfaces at shorter distances and is equipped with the important 360° safety features that help prevent accidental UVC exposure. For ease-of-use it is equipped with a remote control for quick start, and, when coupled with its fan favorite high portability, you can see why the MRS14-4 has become a real bestseller.

This unit uses 360-degree motion sensors as a safety precaution and features four (4), 14" slimline UVC lamps optically centered around a highly polished reflector for maximum intensity. System controls are located directly on the unit, which allows utilization of an electronic timer with user selectable disinfection cycle times, and the option to manually set disinfection cycles times. The MRS14-4 delivers a lethal dose of UV-C energy.

MRS14-4 MOBILE UV UNITFeatures

  • 360° motion + IR sensor safety shut-off
  • Type 304 stainless steel construction
  • Remote control for cycle start/stop
  • Eye hooks on top and bottom to suspend unit upright or upside down
  • Programmable cycle timer
  • Main power switch

Technical Specifications

  • Weight: 20 lbs (9 kg)
  • Dimensions: 25"h * 10"w * 10"d (64cm * 25cm * 25cm)
  • Lamps: qty (4) GML600A
  • Electrical Requirements:
    • 1A @ 120V
  • Power Cord: 8ft (2.4m)
  • Construction: 304 stainless steel

Download Brochure

MRS14-4 MOBILE UV UNIT Callouts

Mobile Room UVC comparison chart

Companion Products


Germicidal Ultraviolet Expertise - 60+ Years of Experience

Our mobile room disinfection units, and the Blade handheld unit, are manufactured in the USA by American Ultraviolet. Other companies may represent themselves as manufacturers, though many are not. Since 1960 American Ultraviolet has manufactured more than 100,000 UVC germicidal fixtures that are safely operating in hospitals, laboratories, clean rooms, doctors' offices, commercial buildings, food processing plants and residences throughout the world – any place a concern for disinfection exists. American Ultraviolet is clearly the leader in UV disinfection technology, and we remain committed to providing the highest quality UVC germicidal equipment at a fair price. We stand fully behind our line of mobile room disinfection units, and all of our ultraviolet light decontamination equipment. We offer full, direct factory support, installation, and training.

To learn more about mobile room disinfection units, the Blade handheld unit, and other UVC products, please visit our technical library where you can download and print literature.


Prolonged, direct exposure to UVC light can cause temporary skin redness and eye irritation. American Ultraviolet systems are designed with safety in mind and, when properly installed by a professional contractor, do not allow exposure to UV radiation and allow for safe operation and maintenance.


The systems are designed to provide UV-C energy. No warranty or responsibility is taken by American Ultraviolet in regards to the process or efficacy of the unit as American Ultraviolet has no control over the use of the system. American Ultraviolet makes no claims to the actual log reduction of microorganisms as it can greatly vary depending on environment. UV-C is an adjunct cleaning method and dirt, dust, and debris need to be removed from surfaces before UV-C treatment.


None of the American Ultraviolet UVC products detailed above are certified, or approved under any applicable laws, as a medical device, and as such, American Ultraviolet, and its Representatives and Distributors, do not currently intend for them to be used as medical devices anywhere globally. Products have not been evaluated by the FDA.