| Designed for installation on larger
tanks or where higher ultraviolet intensities are required,
this system provides approximately 30 CFM to the tank.
It is constructed of 304 stainless steel and incorporates
two high-output slimline ultraviolet lamps, 10"
x 10" x 6" absolute (HEPA) filter and two
electrostatic pre-filters. The standard tank connection
is the three-inch PVC IPS threaded female coupling.
Three- and four-inch, tri-clamp or other connections
are available at a slightly higher cost. Although designed
to mount on top of the tank, the system can be installed
in an adjoining alcove and connected to the tank via
piping.
Dimensions: 38"L x 20"H x 12"W
Power: 118 Volts/60 HZ, 1.69 Amps |
 |
| Designed with an absolute (HEPA) filter,
pre-filters, additional ultraviolet lamps and a pressure
blower system, this unit is designed for ground-level
installation for ease of maintenance. It provides a
minimum of 60 CFM of sterilized air to liquid sugar
storage tanks from a ground installation. It delivers
150 CFM when installed directly to tank. The air is
pulled through the prefilters and HEPA filter and into
a chamber containing four high-intensity ultraviolet
lamps. Sterilized air is discharged through a 4"
outlet port that can be connected to ductwork. Extra
ductwork to the tank will affect the actual CFM delivered.
American Ultraviolet's engineering department will advise
your exact blower requirements prior to your installation.
Return to Sugar/Syurp Storage |
 |
