| Model LTC-1-P, LTC-2-P, LTX-10-P
These 304 stainless steel systems have the same configuration
as the absolute versions but incorporate only single,
10" x 10" x 1" PLIOTRON® washable
electrostatic filters. The filters have a washable membrane
that filters down to 10 microns. These systems are designed
for use in extremely clean atmospheres. All dimensions
and fittings are the same as the larger systems.
The Tank Blower provides up to 55 CFM of filtered air
for venting sugar and syrup tanks. All construction
is 304 stainless steel. The blower fits the 3"
male nipple* on the tank and comes complete with a 6'
service cord and plug.
Overall height: 15" blower motor: 118
Volts /60 HZ 0.42 Amps
The Tank Vent is a companion unit for LTC-1-P, LTC-2-P
and LTX-10-P units. It is similar in configuration to
the standard tank blower but without the blower and
motor and fits the 3" male nipple* on the tank.
Construction is 304 stainless steel.
Overall height: 15"
*Optional 3" and 4" tri-clamp fittings are
available for an additional cost.
Return to Sugar/Syurp Storage |
